9HP 270CC – ROCKET IN POCKET MOTORISED DRIFT TRIKE HUFFY SLIDER BOY GOKART DT4 E-START - BLACK
FULL SIZE for adults/teenagers Features
E-STARTER AND PULL STARTER
Big 26"x 4" Front Wheel
4 Stroke 9hp/270cc Engine
Reduction gearbox/wet clutch
40mm rear axle(much stronger than 25mm axle)
Heavy duty steel chassis
Go kart style bucket seat
5" go kart bigger rear Wheels (11x7.10-5)
A pair PE Drift Sleeves For Rear Wheel(12mm thickness)
Hydraulic Rear Disc Brakes By Foot
CNC upgraded parts(golden color, hubs, collars,chain guard,foot pegs,etc)
Handle Front Disc Brake
Twist Throttle Control
Extended Body Frame
Max Loading 120kgs
Distance Between Seat back to foot Peg: Around 95cm
Fit Adults/Teens
Specifications
Engine: 270cc (9hp) 4 stroke Air Cooled with reduction gearbox
Compression Rate: 9.5:1
Start: E-STARTER and Recoil pull start
Fuel Tank Capacity: 3.6L
Fuel: Unleaded Petrol
Engine Oil Capacity 0.6L
Gearbox Oil Capacity 0.3L
Transmission: Auto
Max Power 9HP
Drive System: Chain
Throttle Control: Handle Twist Throttle
Front Brakes: Handle Cable Lever Brake
Rear Brakes: Hydraulic Ventilated Disc Brake
Final drive: Chain #428
Maximum Speed: >80km/hr (depending terrain surface & rider Weight)
Wheel Size: 26"x4 (Front), 11x7.10-5(Rear)
Ground Clearance Approx 125mm
Rider Capacity 1 person
Maximum Load: 120kg
Dimensions (L x W x H) BOX : 1160 x 900 x 600 (mm)
Drift Trike(L x W x H): 2100 x1200 x 900 (mm)
- W: 80kgs
- W: 85kgs
Assembly
This trike is 85% assembled. Please assemble frame jointing/handle bar/front wheel/rear wheel/seat. It will take you 30-60 mins to finish assembly.
Shipping cost:
Free Shipping is available to most of the postcodes.
Due to the size and weight of the product, This will be shipped to your local freight depot.
Please note that we will only send goods to your local depot. Please ensure that you provided correct address and contact phone numbers are up to date before purchasing, as after the goods have been dispatched, we do not accept responsibility for goods being sent to your address.
Pre-checks before riding this buggy
Please take 10-15 mins to check the item before you ride. Failure to perform those check may result in serious damage or a severe accident.
Make sure all the nuts and bolts are tight enough.
CHECKS:
- Fuel tank: Mounted securely, no fuel leakage.
- Nuts/bolts/fasteners: Tighten any loosed bolts/nuts.
- .RUN-IN The first one hour that the motorcycle is ridden in designed as the run-in period. If the motorcycle is not used carefully during this period, you may end up with a "break down" instead of a "broken in"motorcycle.
- Please don't start moving or race the engine immediately after starting it. Even if the engine is already warmed, run the engine for 15-20 mins at idle speed to give the oil a chance to work up into all the engine parts.
- Avoid the quick acceleration or starting and drive prudently for the first three hours of operation. Let the motorcycle cool completely. The motorcycle ready for regular operation after this procedure is carried out.