adultfu

2-inch High Flow Petrol Water Pump

Featuring 50mm (2") inlet/outlet and a class-leading flow rate of 30,000L/h (500L/min) with a total head of 30m, the hardworking Water Pump is coupled with a powerful 210cc, 3600rpm 4-stroke engine that easily transfers water up to four storeys high with minimum fuss.

With the Water Pump's centrifugal pump and superior impeller design, pump discharge loss is reduced. The suction entry on both sides of the impeller provides an axial balance to the impeller, which offers full range pump performance linear to engine throttle.

The motor assembly is housed in an anti-corrosive tubular steel frame. Not least, ceramic and carbon seals offer great durability and longlasting use. A convenient sized 3.6L fuel tank means it can run for hours on a single fill (load dependent).

Other great features include a 100% duty cycle that's designed for continuous operation, an ultra-fine air filter, easy start pull system, shock-absorbing and noise-reducing rubber feet and bonus hose fittings and inlet filter for a hassle-free setup.

Features
* 8hp high flow petrol water pump
* Flow rate of 30,000 L/h (500L/min)
* Anti-corrosive alloy pump housing
* Ceramic and carbon seals
* Full 50mm (2") inlet / outlet
* Solid impeller
* Gearless direct drive
* 100% duty cycle
* Easy start pulling system
* Bonus hose fittings and inlet filter
* Anti-shocking and noise-reducing rubber feet
* Ultra-fine air filter

Specifications
* Brand: Giantz
* Engine type: 4-stroke, OHV, Air-cooled
* Engine power: 8hp
* Displacement: 210cc
* Flowing volume: 30,000L/hour (500L/min)
* Fuel capacity: 3.6L
* Fuel type: Regular unleaded 95+ RON
* Engine oil type: 10W-30/ 10W-40/ 15W-30/ 15W-40 non synthetic engine oil (not included in purchase)
* Speed: 3,600rpm
* Output size: 50mm (2")
* Input size: 50mm (2")
* Lift: 30m
* Suction: 8m

Package Content
1 x Giantz Water Pump
2 x Hose Fitting
1 x Inlet Filter
1 x Assemble Tool
3 x Hose Clip
1 x User Manual

This pump is ideal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning etc. It has a reliable rust-resistant brass impeller and 55L/min maximum flow rate! Delivery head of 60 metres and suction up to 8 metres. This pump is simple to install and easy to use. No need of sophisticated knowledge of pumping but just a little imagination of how much you can do with it. It will pump up the water in no time.

Features
Powerful 750W, 3300L/H, 60m head model
Superior rust-resistant brass impeller
Highly conductive and low heat generation copper motor
Low consumption but high flow
Easy operation and maintainence
Built to last cast iron construction
Ceramic and carbon mechanical seal
Compliance to AU standard
Low noise level operation
12 month warranty
Ideal for pool pumping, garden sprinkling, irrigation, cleaning, home water supply and more

Specifications
Voltage/ Frequency: 220~240V/ 50Hz
Impellar: Brass
Power: 1HP/ 750w
Motor wire: Copper
Flow rate: 3300L//Hour (55L/Min)
Max head: 60m
Inlet/outlet: 1 inch
Suction: 8m
Speed: 2900r/min
Protection: IP65

Package Content
1 x Pump QB80

2-inch High Flow Petrol Water Pump

Featuring 50mm (2") inlet/outlet and a class-leading flow rate of 30,000L/h (500L/min) with a total head of 50m, the hardworking Water Pump is coupled with a powerful 235cc, 3600rpm 4-stroke engine that easily transfers water up to four storeys high with minimum fuss.

With the Water Pump's centrifugal pump and superior impeller design, pump discharge loss is reduced. The suction entry on both sides of the impeller provides an axial balance to the impeller, which offers full range pump performance linear to engine throttle.

The motor assembly is housed in an anti-corrosive tubular steel frame. Not least, ceramic and carbon seals offer great durability and longlasting use. A convenient sized 4.5L fuel tank means it can run for hours on a single fill (load dependent).

Other great features include a 100% duty cycle that's designed for continuous operation, an ultra-fine air filter, easy start pull system, shock-absorbing and noise-reducing rubber feet and bonus hose fittings and inlet filter for a hassle-free setup.

Features
* 8hp high flow petrol water pump
* Flow rate of 30,000 L/h (500L/min)
* Anti-corrosive alloy pump housing
* Ceramic and carbon seals
* Full 50mm (2") inlet / outlet
* Solid impeller
* Gearless direct drive
* 100% duty cycle
* Easy start pulling system
* Bonus hose fittings and inlet filter
* Anti-shocking and noise-reducing rubber feet
* Ultra-fine air filter

Specifications
* Brand: Giantz
* Engine type: 4-stroke, OHV, Air-cooled
* Engine power: 8hp
* Displacement: 235cc
* Flowing volume: 30,000L/hour (500L/min)
* Fuel capacity: 4.5L
* Fuel type: Regular unleaded 95+ RON
* Engine oil type: 10W-30/ 10W-40/ 15W-30/ 15W-40 non synthetic engine oil (not included in purchase)
* Speed: 3,600rpm
* Output size: 50mm (2")
* Input size: 50mm (2")
* Lift: 50m
* Suction: 8m
* Colour: Black and Red

Package Content
1 x Giantz Water Pump
2 x Hose Fitting
1 x Inlet Filter
1 x Assemble Tool
3 x Hose Clip
1 x User Manual

When low water pressure gets you down, power it up with our Peripheral Water Pump. Pumping out at a rate of 35L/min with a delivery head of 35m and suction up to 8m, it is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. Use it to pump your pool, increase water pressure in your pipes, water your gardens, irrigate, clean and more. The water pump features an IP-rated commercial copper motor, rust-resistant brass impeller, cast iron pump body, 1-inch inlet and outlet ports, efficient TEFC cooling system, mountable base and a power box that is both waterproof and dirt-proof. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. There is no need of any sophisticated knowledge of pumping, just a little imagination of how much you can do with it. It will pump up the water in no time.

Features:
Automatic pump control
Robust rust-resistant brass impeller
Mountable base
TEFC cooling system
High head and steady flow
Low power consumption
Easy installation
Easy to operate and maintain
Ideal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning and more

Specifications:
Peripheral water pump
Power: 0.5hp/370W 220-240V/50Hz
Max suction: 8m
Max head: 35m
Max flow: 35L/min
Protection: IP44
Inlet/outlet size: 1-inch
Wire: Copper
Power cable: 90cm
Impeller: Brass
Stator: 45mm
Max pressure: 3.5bar
Noise level: 70dB

Pump controller
Voltage: 220/240V
Frequency: 50/60Hz
Protection grade: IP65
Max. current: 10A
Max. operating temperature: 60°
Max. working bar pressure: 10bar
Inlet/outlet size: 1"" (25mm)
Dimensions: 22cm x 12.4cm x 17cm
Colour: Yellow

Package Contents:
1 x Peripheral Water Pump 
1 x Pump Controller 

When low water pressure gets you down, power it up with our Peripheral Water Pump. Pumping out at a rate of 35L/min with a delivery head of 35m and suction up to 8m, it is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. Use it to pump your pool, increase water pressure in your pipes, water your gardens, irrigate, clean and more. The water pump features an IP-rated commercial copper motor, rust-resistant brass impeller, cast iron pump body, 1-inch inlet and outlet ports, efficient TEFC cooling system, mountable base and a power box that is both waterproof and dirt-proof. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. There is no need of any sophisticated knowledge of pumping, just a little imagination of how much you can do with it. It will pump up the water in no time.

Features:
Automatic pump control
Robust rust-resistant brass impeller
Mountable base
TEFC cooling system
High head and steady flow
Low power consumption
Easy installation
Easy to operate and maintain
Ideal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning and more

Specifications:
Peripheral water pump
Power: 0.5hp/370W 220-240V/50Hz
Max suction: 8m
Max head: 35m
Max flow: 35L/min
Protection: IP44
Inlet/outlet size: 1-inch
Wire: Copper
Power cable: 90cm
Impeller: Brass
Stator: 45mm
Max pressure: 3.5bar
Noise level: 70dB

Pump controller
Voltage: 220/240V
Frequency: 50/60Hz
Protection grade: IP65
Max. current: 10A
Max. operating temperature: 60°
Max. working bar pressure: 10bar
Inlet/outlet size: 1"(25mm)
Dimensions: 22cm x 12.4cm x 17cm
Colour: Yellow

Package Contents:
1 x Peripheral Water Pump 
1 x Pump Controller 

When low water pressure gets you down, power it up with our Peripheral Water Pump. Pumping out at a rate of 35L/min with a delivery head of 35m and suction up to 8m, it is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. Use it to pump your pool, increase water pressure in your pipes, water your gardens, irrigate, clean and more. The water pump features an IP-rated commercial copper motor, rust-resistant brass impeller, cast iron pump body, 1-inch inlet and outlet ports, efficient TEFC cooling system, mountable base and a power box that is both waterproof and dirt-proof. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. There is no need of any sophisticated knowledge of pumping, just a little imagination of how much you can do with it. It will pump up the water in no time.

Features:
Automatic pump control
Robust rust-resistant brass impeller
Mountable base
TEFC cooling system
High head and steady flow
Low power consumption
Easy installation
Easy to operate and maintain
Ideal for pool pumping, increasing the water pressure in the pipe, garden sprinkling, irrigation, cleaning and more

Specifications:
Peripheral water pump
Power: 0.5hp/370W 220-240V/50Hz
Max suction: 8m
Max head: 35m
Max flow: 35L/min
Protection: IP44
Inlet/outlet size: 1-inch
Wire: Copper
Power cable: 90cm
Impeller: Brass
Stator: 45mm
Max pressure: 3.5bar
Noise level: 70Db

Pump controller
Voltage: 220/240V, 50/60Hz
Max. current: 10A
Frequency: 50/60Hz
Protection grade: IP65
Max. water temperature: 60°
Starting pressure: 1.5-3bar
Max. pressure for use: 10bar

Package Contents:
1 x Peripheral Water Pump 
1 x Pump Controller 

When low water pressure gets you down, power it up with our Giantz 5-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25'' inlet and 1'' outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 150L/min with a 60m head, the 2000W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.

Features:
Powerful 2000W self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Huge 60m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug

Specifications:
Pump:
Max power: 2000W, 2.8hp
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 9,000L/h (150L/min)
Max head: 60m
Duty cycle: Continuous
Impeller: Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130°C)
Max ambient temperature: 40°C
Max liquid temperature: 60°C
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60°C
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1'' (25mm)
Dimensions: 22cm x 12.4cm x 17cm
Colour: Yellow

Package Contents:
Giantz 5-stage Water Pumpx 1
Pump Controllerx 1
User manualx1

When low water pressure gets you down, power it up with our Giantz 5-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25‘’ inlet and 1‘’ outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 150L/min with a 60m head, the 2000W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.

Features:
Powerful 2000W self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Huge 60m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug

Specifications:
Pump:
Max power: 2000W, 2.8hp
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 9,000L/h (150L/min)
Max head: 60m
Duty cycle: Continuous
Impeller: Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130??C)
Max ambient temperature: 40??C
Max liquid temperature: 60??C
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60??C
Starting pressure: 1.5-3bar
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1'' (25mm)
Dimensions: 22cm x 15cm x 15cm
Weight: 1.5kg

Package Contents:
Giantz 5-stage Water Pumpx 1
Pump Controllerx 1
User manualx1

When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25‘’ inlet and 1‘’ outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.

Features:
Powerful 2500W self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Huge 70m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug

Specifications:
Pump:
MAX power: 2500W, 3.5hp
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 12,000L/h (200L/min)
Max head: 70m
Duty cycle: Continuous
Impeller Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130°C)
Max ambient temperature: 40°C
Max liquid temperature: 60°C
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60°C
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1‘’(25mm)
Dimensions: 22cm x 12.4cm x 17cm
Colour: Yellow

Package Contents:
Giantz 6-stage Water Pumpx 1
Pump Controllerx 1
User manualx1

When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25'' inlet and 1'' outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.

Features:
Powerful 2500W self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Huge 70m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug

Specifications:
Pump:
MAX power: 2500W, 3.5hp
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 12,000L/h (200L/min)
Max head: 70m
Duty cycle: Continuous
Impeller Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130°C)
Max ambient temperature: 40°C
Max liquid temperature: 60°C
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60°C
Starting pressure: 1.5-3bar
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1''(25mm)
Dimensions: 22cm x 15cm x 15cm
Weight: 1.5kg

Package Contents:
1 x Giantz 6-stage Water Pump
1 x Pump Controller
1 x User manual

Introducing this well made garden pump. It is ideal for connecting your rain tank or irrigating your garden. This 800W pump will produce a constant flow rate of 54L/min assuring it will provide ample pressure for your garden hose and sprinklers. Having it designed separately, it'll be easier to change and store in the future as well.

While having higher watts pump will pump up plenty of water, it will also pump up your electric bills! Using our 800 watts pump, it is cheaper to run and will still supply plenty of water.

Features

Stainless Steel Garden Pump

CE/GS/EMC approval
Durable stainless steel body
Lightweight and portable for ease of use
Sturdy vibration resistant pump base
Forced air cooling motor
Waterproof power switch
Built in dry run & thermal protection switch
Fully automatic pump controller
Rust-resistant coated motor housing
Suitable for parks, tanks, vegetable patches and gardens
Simple installation required

Automatic Pressure Controller
Automatic electronic water pressure controller
Maintains stable water pressure and flow
Provides steady performance of the pump
Requires low maintenance
Light indication for operation
Convenient connection design
SAA certified plug and socket
Suitable for jet pumps, garden pumps and water pumps

Specifications:

Water Pump
Voltage: 220/240V, 50/60Hz
Max Flow: 54L/min
Max. Delivery Height: 40m
Shaft material: Carbon Steel
Hosing material: Stainless steel and alloy
Mechanical seal: Ceramic/Carbon
Inlet/Outlet size: 25mm(1 inch)
Protection Class: IPX4
Suction depth: 7m

Controller
Voltage: 220/240V, 50/60Hz
Max. Current: 10A
Frequency: 50/60Hz
Protection grade: IP65
Max. water temperature: 60 degrees
Starting pressure: 1.5-3 bar
Max. pressure for use: 10 bar

Package Content
1 x 800W Garden Pump
1 x Controller
1 Set x Assemble accessories
1 Set x User manual

Giantz Stage 1500W High-Pressure Garden Water Pump Tank Rain Farm Irrigation

Made from durable stainless steel and alloy, this garden pump is the perfect water pump for your home and garden. It is ideal for connecting your rain tank or to irrigate your garden. This pump produces 72L/min makes it effortless in irrigating the garden or veggie patch. The pump has overheat and overload protections; makes it very safe to use.

Incorporating both hydraulic and electronic components, the Automatic Pressure Controller is capable of simultaneously detecting both pressure and flow, and using this information, it is able to control and also protect the pump against abnormal running situations. This automatic pressure controller will provide you with a perfect control of your household pressure pumps. Suitable for various pumps such as jet pumps, stage pumps and garden pumps, this amazing electronic pressure controller is your reliable working partner. Having it designed separately, it'll be easier to change and store in the future as well.

While having higher watts pump will pump up plenty of water, it will also pump up your electric bills! Using our 1500 watts pump, it is cheaper to run and will still supply plenty of water.

Features
Garden Pump
CE/GS/EMC approval
Durable stainless steel body
Lightweight and portable for ease of use
Sturdy vibration resistant pump base
Forced air cooling motor
Waterproof power switch
Built in dry run & thermal protection switch
Fully automatic pump controller
Rust-resistant coated motor housing
Suitable for parks, tanks, vegetable patches and gardens
Simple installation required
Australian safety standard

Automatic Pressure Controller
Automatic electronic water pressure controller
Maintains stable water pressure and flow
Provides steady performance of the pump
Requires low maintenance
Light indication for operation
Convenient connection design
SAA certified plug and socket
Suitable for jet pumps, garden pumps and water pumps

Specifications
Garden Pump:
Body material: Stainless steel
Shaft material: Carbon steel
Hosing material: Stainless steel and alloy
Mechanical seal: Ceramic/carbon
Voltage: 240V
Frequency: 50Hz
Maximum input power: 1500W
Maximum head: 52m
Pump rate: 72L/min or 4,320L/H
Suction height: 8m
Pipe outlet diameter: 1"" (25mm)
Protection: IP44
Insulation Class: B (130°C)
Automatic Pressure Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Protection grade: IP65
Maximum current: 10AMP
Maximum operating temperature: 60 degrees
Maximum working bar pressure: 10 bar
Inlet and outlet size: 1""(25mm)
Colour: Yellow

Package Content
1 x Garden Pump
1 x Controller
1 Set x Assemble Accessory
1 x User Manual

Giantz Stage 800W Garden Water Pump High Pressure Tank Rain Farm Irrigation

To get the best out of your water pumping needs, look no further than the GIANTZ Water Pump with Controller. It’s designed to pump up the volume with a consistent and powerful flow of water for your various water-related tasks.

Everything about the GIANTZ Water Pump is built to perform and last. From its durable stainless steel exterior to its highly efficient 800W copper motor to its precise fittings, the Pump is self-primed to deliver a maximum flow rate of 54 litres/min with a maximum water delivery height of up to 40m. It’s thermally protected with an effective cooling system, which means that the internal components will not burn out when critical operating temperature is breached or when the Pump is running dry.

The Pump is lightweight and portable for ease of use anywhere and has a sturdy, vibration-resistant base to keep it steady at all times. All Pump components are protected from the elements by a weatherproof control box.

The Automatic Pressure Controller helps to maintain a stable water pressure and flow, and features auto on/off, an accurate pressure gauge and an adjustable start-up pressure of between 1.5 bar and 3.0 bar. Maximum working water pressure is up to 10 bar.

The GIANTZ Water Pump with Controller is particularly suited for facilitating auxiliary water supply as well as enhancing water pressure for a host of home uses such as washing, showering or flushing. Nothing beats the GIANTZ for choice.

Features
Stainless Steel Garden Pump
CE/GS/EMC approval
Durable stainless steel body
Lightweight and portable for ease of use
Sturdy vibration resistant pump base
Forced air cooling motor
Waterproof power switch
Built in dry run & thermal protection switch
Fully automatic pump controller
Rust-resistant coated motor housing
Suitable for parks, tanks, vegetable patches and gardens
Simple installation required

Automatic Pressure Controller
Automatic electronic water pressure controller
Maintains stable water pressure and flow
Provides steady performance of the pump
Requires low maintenance
Light indication for operation
Convenient connection design
SAA certified plug and socket
Suitable for jet pumps, garden pumps and water pumps

Specifications:
Water Pump:
Voltage: 220/240V, 50/60Hz
Max Flow: 54L/min
Max. Delivery Height: 40m
Shaft material: Carbon Steel
Hosing material: Stainless steel and alloy
Mechanical seal: Ceramic/Carbon
Inlet/Outlet size: 25mm(1 inch)
Protection Class: IPX4
Suction depth: 7m
Controller:
Voltage: 220/240V, 50/60Hz
Max. Current: 10A
Frequency: 50/60Hz
Protection grade: IP65
Max. water temperature: 60 degrees
Starting pressure: 1.5-3 bar
Max. pressure for use: 10 bar

Package Content
1 x 800W Garden Pump
1 x Automatic Pressure Controller
1 Set x Assemble accessories
1 Set x User manual

Giantz Stage 1500W Garden Water Pump High-Pressure Tank Rain Farm Irrigation

Made from durable stainless steel and alloy, this garden pump is the perfect water pump for your home and garden. It is ideal for connecting your rain tank or to irrigate your garden. This pump produces 72L/min makes it effortless in irrigating the garden or veggie patch. The pump has overheated and overload protections; makes it very safe to use.

Incorporating both hydraulic and electronic components, the Automatic Pressure Controller is capable of simultaneously detecting both pressure and flow, and using this information, it is able to control and also protect the pump against abnormal running situations. This automatic pressure controller will provide you with a perfect control of your household pressure pumps. Suitable for various pumps such as jet pumps, stage pumps and garden pumps, this amazing electronic pressure controller is your reliable working partner. Having it designed separately, it'll be easier to change and store in the future as well.

While having higher watts pump will pump up plenty of water, it will also pump up your electric bills! Using our 1500 watts pump, it is cheaper to run and will still supply plenty of water.

Features
Garden Pump
CE/GS/EMC approval
Durable stainless steel body
Lightweight and portable for ease of use
Sturdy vibration resistant pump base
Forced air cooling motor
Waterproof power switch
Built in dry run & thermal protection switch
Fully automatic pump controller
Rust-resistant coated motor housing
Suitable for parks, tanks, vegetable patches and gardens
Simple installation required
Australian safety standard

Specifications
Body material: Stainless steel
Shaft material: Carbon steel
Hosing material: Stainless steel and alloy
Mechanical seal: Ceramic/carbon
Voltage: 240V
Frequency: 50Hz
Maximum input power: 1500W
Maximum head: 52m
Pump rate: 72L/min or 4,320L/H
Suction height: 8m
Pipe outlet diameter: 1"" (25mm)
Protection: IP44
Insulation Class: B (130°C)

Package Content
1 x Garden Pump
1 x Controller
1Set x Assemble Accessory
1 x User Manual

GIANTZ 1800W Multi-Stage Pump w/ Automatic Pressure Controller

Suitable for household gardens or farming, this impressive multi-stage pressure pump is your reliable working partner. With its abundance of great, powerful specifications and features, it was designed to supply a constant and stable pressure solution. Strong 1800W motor power, massive flow rate, stainless steel pump body and anti-corrosive housing, it's packed with every feature that makes it perfect. Everything is made easy where it automatically turns on/off on open/closing of any tap. Buy one today and have the best and most reliable equipment at hand.

Our weight matches quality compared to others offering similar products but are lighter in weight and are made of plastic impellers which are fragile. So don't be fooled by the cheap models with easy broken plastic impellers on the market, ensure to confirm before you buy! Our pump has Professional Grade Stainless Steel on the Body, Motor Housing, Shaft and Impellers. Our Multi-stage pump surpasses all the cheap models on the market in terms of Performance and Durability!

While having higher watts pump will pump up plenty of water, it will also pump up your electric bills! Using our 1800 watts pump, it is cheaper to run and will still supply plenty of water.

Features
Powerful self-priming multi stage pump
Superior stainless steel impellers for long life use
Forced air cooling motor
100% duty cycle - designed for continuous operation
Fully automatic operation - electronic on/off controller
Premium quality stainless steel pump body with cast iron ends
Rust-resistant coated motor housing
Built-in dry run and thermal protection switch
Automatic on/off pressure controller with adjustable starting up pressure
Full copper motor - more stable performance and lower energy consumption
SAA approved power plug and cord
CE/TUV/GS certified

Automatic Pressure Controller:
Automatic electronic water pressure controller
Maintains stable water pressure and flow
Provides steady performance of the pump
Requires low maintenance
Light indication for operation
Convenient connection design
SAA certified plug and socket
Suitable for jet pumps, garden pumps and water pumps

Specifications:
Pump:
Material: Stainless steel
Shaft material: Stainless steel
Impeller material: Stainless steel
Motor housing material: Aluminium
Mechanical seal material: Ceramic / carbon
Voltage: 240V
Frequency: 50Hz
Motor power: 1800W, 2.5HP
Duty cycle: Continuous
Max. pumping height: 58m
Max. flow rate: 12600L/hr, 210L/min
Suction height: 9m
Inlet/Outlet Size: 25mm
Protection class: IP44

Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60 degrees
Maximum working bar pressure: 10 bar
Protection grade: IP65
Inlet and outlet size: 1"(25mm)
Dimensions: 22 x 12.4 x 17cm
Colour: Yellow

Package Content
1 x Multi Stage Pump
1 x Automatic Pressure Controller
1 Set x Assemble accessories
1 x User manual

Stainless Steel | 1100W & 4600L/H | w/ Pressure Controlelr

Made from durable stainless steel and alloy, this garden pump is the perfect water pump for your home and garden.Can be used for filling up toilets, washing machines, dishwashers, kitchen taps, showers, irrigation systems or watering your garden! There are just so much you can do with this pump. The pump has overheat and overload protections which makes it very safe to use.

Instead of some flimsy fitting, ours come with a brass made fitting that ensure a long lasting performance product for your household. With a class beating of 45m head and constant 4600L/hour flow rate, we guarantee that this pump will be your favourite! Combined with IP rated commercial motor and stainless steel pump body, there is no doubt on its quality.

Incorporating both hydraulic and electronic components, the Automatic Pressure Controller is capable of simultaneously detecting both pressure and flow, and using this information, it is able to control and also protect the pump against abnormal running situations. This automatic pressure controller will provide you with a perfect control of your household pressure pumps. Suitable for various pumps such as jet pumps, stage pumps and garden pumps, this amazing electronic pressure controller is your reliable working partner. Having it designed separately, it'll be easier to change and store in the future as well.

As we care about our customers, we provide a 12 month warranty so you can purchase with a peace of mind. For any enquiries, just contact our customer service team in Melbourne.

Time to save on your energy bill and own a low noise operation water pump! Purchase now, it will get delivered to your doorstep. It's ready to use once it arrives.

Features
Jet Pump
CE/GS/EMC approval
Durable stainless steel body
Lightweight and portable for ease of use
Forced air cooling motor
Waterproof power switch
Built in dry run & thermal protection switch
Rust-resistant coated motor housing
Suitable for parks, tanks, vegetable patches and gardens
Simple installation required

Controller
Automatic electronic water pressure controller
Maintains stable water pressure and flow
Provides steady performance of the pump
Requires low maintenance
Light indication for operation
Convenient connection design
SAA certified plug and socket
Suitable for jet pumps, garden pumps and water pumps

Specifications
Jet Pump
Body material: Stainless steel
Shaft material: Carbon steel
Motor housing material: Aluminium
Mechanical seal: Ceramic/carbon
Voltage: 240V
Frequency: 50Hz
Power: 1100W
Flow rate: 77L/min; 4600L/H
Maximum delivery height: 45m
Protection class: IP44/IP54
Inlet/outlet size: 1 inch (25mm)
Controller
Voltage: 220/240V, 50/60Hz
Max. Current: 10A
Frequency: 50/60Hz
Protection grade: IP65
Maximum water temperature: 60 degrees
Starting pressure: 1.5-3 bar
Maximum pressure for use: 10 bar

Package Content
1 x Garden Pump
1 x Controller
1 Set x Assemble Accessory
1 x User Manual

Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

8HP Twin Impeller Water Pump

When it comes to heavy duty cleaning, irrigating the garden, pumping out a flooded basement or just general water pump applications, few can rival the power and performance of the GIANTZ 8hp 2-inch Twin Impeller Water Pump.

With an impressive 30,000l/h (500l/min) maximum flow rate and a massive head of 160m, the single cylinder 230cc 3600rpm 4-stroke air cooled gasoline engine can push water as high as four storeys without as much as a stutter. What's more, the twin impeller design facilitates efficient water pumping by minimizing pump discharge loss. Full range pump performance is also enhanced with the suction entry on both sides of the impeller providing the necessary axial balance to achieve it. The three outlets design, one 50mm(2.0”) and two 40mm(1.5”), also allows for varied water uses and a convenient 3.6-litre fuel tank gets the pump running for up to four hours on a single full tank.

Other great features include an engine damage prevention low oil alert alarm that stops the engine when oil is insufficient, easy pull start, soft rubber feet to reduce shock and noise and a steel tubular frame that encloses the pump for easy carry. Not least, the water pump is leak-proof sealed and rust-resistant for long-lasting use.

Note: Minimal assembly required.

Features
* 8hp high pressure water pump
* Low oil alert function
* 160m-delivery height
* Huge 500l/min maximum flow rate
* Easy start-up pull system
* Twin impeller design
* Three-outlet design
* Shock and noise absorbing rubber feet
* Rust-resistant
* Leak-proof sealed
* Bonus alloy fittings for hose connection

Specifications
* Brand: Giantz
* Power Output: 8hp / 3600rpm
* Displacement: 230cc
* Engine Type: 1-Cylinder, 4-stroke, Air-cooled gasoline engine
* Work capacity 163cm³
* Ignition system: T.C.I (Non-contact transistor)
* Starting system: Recoil
* Fuel tank capacity: 3.6L
* Engine oil system capacity: 0.6L
* Water pump double impeller
* Water pump Outlet: 2x40mm (1.5”) and 1x50mm (2”)
* Maximum delivery lift: 160m
* Suction height 8m Max.
* Water displacement: 30,000L/Hr

Package Contents
1 x High Pressure Pump
1 x Alloy Fittings
1 x Outlet Cover
4 x Rubber Feet
1 x Inlet Filter
1 x Hose Clamp
1 x User Manual

4320L/H Leak Proof Weatherproof Garden Pump
Made from durable stainless steel and alloy, this garden pump is the perfect water pump for your home and garden. Can be used for filling up toilets, washing machines, dishwashers, kitchen taps, showers, irrigation systems or watering your garden! There are just so much you can do with this pump. This pump produces 72L/min makes it effortless in irrigating the garden or veggie patch. The pump has overheat and overload protections; makes it very safe to use.
Time to save on your energy bill and own a low noise operation water pump! Purchase now, it will get delivered to your doorstep. It's ready to use once it arrives.

Features
* CE/GS/EMC approval
* Durable stainless steel body
* Lightweight and portable for ease of use
* Sturdy vibration resistant pump base
* Forced air cooling motor
* Waterproof power switch
* Built in dry run & thermal protection switch
* Rust-resistant coated motor housing
* Suitable for parks, tanks, vegetable patches and gardens
* Simple installation required

Specifications

• Body material: Stainless steel
• Shaft material: Carbon steel
• Hosing material: Stainless steel and alloy
• Mechanical seal: Ceramic/carbon
• Voltage: 240V
• Frequency: 50Hz
• Max input power: 1500W
• Maximum head: 52m
• Pump rate: 72L/min or 4,320L/H
• Maximum pressure: 10 bar
• Maximum ambient temperature: 40°C
• Suction height: 8m
• Pipe outlet diameter: 1" (25mm)
• Protection: IP44
• Insulation Class: B (130°C)

Package Contents
1 x Garden Pump
1 x Assemble Accessory
1 x User Manual

28,000L/H Submersible Pump
This GIANTZ submersible water pump is ideal for draining flooded areas or emptying water tanks, pools and spas. The powerful 2000W motor enables the pump to create a maximum head of 25 metres while being submerged, which allows the pump to carry the water to wherever you need.
Suitable for both clean and dirty water, it is capable to handle solids up to 1.5cm wide. Made to last, stainless steel body with rust proof and leak proof seal are not to be missed. Also comes with thermal overload protection that protects internal components with automatic shut off when operating temperatures are exceedingly high.
Comes with fully automatic float switch and 10m highly conductive copper cable, we made it to ensure your job is not harder than it is already.

Features
* GIANTZ 2000W 28,000 L/H Submersible Pump
* Adjustable automatic float switch prevents dry running
* Heavy Duty Steel Handle
* Stainless Steel, Rust Resistant Casing
* Leak Proof Ceramic & Carbon Seals
* Powerful Motor with 25M Head
* Robust Cast Iron base
* 2 Inch Outlet handles solid up to 1.5cm

Specifications
* Power: 2000W
* Maximum Flow: 28,000L/H
* Maximum Head: 25m
* Inlet/Outlet: 2 inch
* Cable: 10m (copper)
* Seal: Ceramic/ Carbon
* Pump body: stainless steel
* Base: Cast iron
* Shaft: Stainless steel

Package Contents
1 x Submersible water pump

Stainless Steel | 1100W & 4600L/H | Garden Jet Pump

Made from durable stainless steel and alloy, this garden pump is the perfect water pump for your home and garden.Can be used for filling up toilets, washing machines, dishwashers, kitchen taps, showers, irrigation systems or watering your garden! There are just so much you can do with this pump. The pump has overheat and overload protections which makes it very safe to use.

Instead of some flimsy fitting, ours come with a brass made fitting that ensure a long lasting performance product for your household. With a class beating of 45m head and constant 4600L/hour flow rate, we guarantee that this pump will be your favourite! Combined with IP rated commercial motor and stainless steel pump body, there is no doubt on its quality.

Time to save on your energy bill and own a low noise operation water pump! Purchase now, it will get delivered to your doorstep. It's ready to use once it arrives.

Features
* CE/GS/EMC approval
* Durable stainless steel body
* Lightweight and portable for ease of use
* Forced air cooling motor
* Waterproof power switch
* Built in dry run & thermal protection switch
* Rust-resistant coated motor housing
* Suitable for parks, tanks, vegetable patches and gardens
* Simple installation required

Specifications
* Body material: Stainless steel
* Shaft material: Carbon steel
* Motor housing material: Aluminium
* Mechanical seal: Ceramic/carbon
* Voltage: 240V
* Frequency: 50Hz
* Power: 1100W
* Flow rate: 77L/min; 4600L/H
* Maximum delivery height: 45m
* Protection class: IP44/IP54
* Inlet/outlet size: 1 inch (25mm)

Package Contents
1 x Garden Jet Pump
1 x Assemble Accessory
1 x User Manual

Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260