adultfu

Description

The Loft armchair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W540 x D530 x H820 Seat Height 450
• Unit Weight: 3.7kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Sky Pro takes the Sky Chair to new heights with its ability to stack and no assembly required.

Since entering the market, the Sky Chair has become one of our best-selling chairs.  With its modern appearance, comfort and strength, we have seen the Sky pop up at restaurants and resorts across the country.

Customers have told us that while they love the Sky Chair, it would be great if they didn’t have to assemble it and it was stackable. So, after going back to the drawing board, we have delivered on both these suggestions. We are pleased to introduce the Sky Pro!

Features

• 5 year structural warranty
• Dimensions: 540W x 600D x 810H x 450 Seat Height
• Made in Europe
• Stocked in: Black, Anthracite & White
• Suitable for indoor and outdoor use
• SWL: 150 kg
• The Sky Pro Chair is produced with polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology
• Unit Weight: 5kg
• Weather resistant, UV Stabilised – Will not fade under direct sunlight. Furnlink warrant excessive fading in a given period, refer to product warranties.
• Supplied assembled
• Stackable
• Australian Registered Design 202116446

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Ares Chair by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Ares Chair is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Artemis Armchair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 475W x 580D x 830H x 450 Seat Height
• Unit Weight: 4.5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Chocolate, Taupe
• Replaceable feet
• CATAS Tested
• Matching Products: Artemis Armchair, Ares Barstool
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Loft armchair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W540 x D530 x H820 Seat Height 450
• Unit Weight: 3.7kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Artemis Armchair by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Artemis Armchair is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Ares Chair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 565W x 580D x 830H x 450 Seat Height
• Arm Height: 675H
• Unit Weight: 5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Chocolate, Taupe
• Replaceable feet
• CATAS Tested
• Matching Products: Ares Chair, Ares Barstool
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Artemis Armchair by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Artemis Armchair is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Ares Chair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 565W x 580D x 830H x 450 Seat Height
• Arm Height: 675H
• Unit Weight: 5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Chocolate, Taupe
• Replaceable feet
• CATAS Tested
• Matching Products: Ares Chair, Ares Barstool
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Sky Pro takes the Sky Chair to new heights with its ability to stack and no assembly required.

Since entering the market, the Sky Chair has become one of our best-selling chairs.  With its modern appearance, comfort and strength, we have seen the Sky pop up at restaurants and resorts across the country.

Customers have told us that while they love the Sky Chair, it would be great if they didn’t have to assemble it and it was stackable. So, after going back to the drawing board, we have delivered on both these suggestions. We are pleased to introduce the Sky Pro!

Features

• 5 year structural warranty
• Dimensions: 540W x 600D x 810H x 450 Seat Height
• Made in Europe
• Stocked in: Black, Anthracite & White
• Suitable for indoor and outdoor use
• SWL: 150 kg
• The Sky Pro Chair is produced with polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology
• Unit Weight: 5kg
• Weather resistant, UV Stabilised – Will not fade under direct sunlight. Furnlink warrant excessive fading in a given period, refer to product warranties.
• Supplied assembled
• Stackable
• Australian Registered Design 202116446

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Artemis Armchair by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Artemis Armchair is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Ares Chair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 565W x 580D x 830H x 450 Seat Height
• Arm Height: 675H
• Unit Weight: 5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Chocolate, Taupe
• Replaceable feet
• CATAS Tested
• Matching Products: Ares Chair, Ares Barstool
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Sky Chair by Siesta.

Features

• 5 year structural warranty
• Dimensions: 540W x 600D x 810H x 450 Seat Height
• Made in Europe
• Stocked in: Black, Anthracite, Red, White, Mango & Taupe
• Suitable for indoor and outdoor use
• SWL: 150 kg
• The Sky Chair chair is produced with polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology
• Unit Weight: 5kg
• Weather resistant, UV Stabilised – Will not fade under direct sunlight. Furnlink warrant excessive fading in a given period, refer to product warranties.
• Supplied unassembled – Assembly required
• Not stackable
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Lucy Chair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W450 x D530 x H820 Seat Height 450
• Unit Weight: 3.3kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Lucy Chair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W450 x D530 x H820 Seat Height 450
• Unit Weight: 3.3kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Ibiza Armchair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Ibiza Armchair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Florida Chair & Jamaica Barstool

Features

• Stackable:?4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 570W x 550D x 880H x 460 Seat Height
• Arm Height: 650H
• Unit Weight: 5.5kg, SWL: 150kg, Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Florida Chair, Jamaica Barstool, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Lucy Chair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W450 x D530 x H820 Seat Height 450
• Unit Weight: 3.3kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Pacific Armchair with Batyline fabric from Serge Ferrari is made from a weather-proof, UV-protected resin reinforced by glass fiber that stands up to our Australian summer showers and strong sun, making this armchair the ideal, worry-free addition to your outdoor seating area. This versatile armchair pairs perfectly with our Pacific Sunlounger ,as well as a wide range of other outdoor tables. For domestic or commercial use.

Features

• Made in Europe by Siesta
• High quality polypropylene reinforced with fibre glass
• UV stabilised (Fade Resistant)
• Seat height 440mm
• Overall dimensions: 900h x 620d x 570w
• Stackable to 4 high
• Unit weight: 5.2kg
• CATAS tested
• 3 year warranty
• SWL: 150kg
• High quality Batyline Duo fabric by Serge Ferrari
• Multi-filament, high-tenacity polyester yarn
• Solution-dyed protective sheath
• Biaxiale tensioning for extreme resistance
• Extreme tear resistance
• Comfortable
• UV protected
• Weather protected
• Quick drying
• Hygienic – mould resistant treatment
• stain resistant
• Fabric can be replaced
• 3 year warranty
• Suitable for indoor & outdoor commercial application
• Australian Registered Design 202110453 & 202110454
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Pacific Armchair with Batyline fabric from Serge Ferrari is made from a weather-proof, UV-protected resin reinforced by glass fiber that stands up to our Australian summer showers and strong sun, making this armchair the ideal, worry-free addition to your outdoor seating area. This versatile armchair pairs perfectly with our Pacific Sunlounger ,as well as a wide range of other outdoor tables. For domestic or commercial use.

Features

• Made in Europe by Siesta
• High quality polypropylene reinforced with fibre glass
• UV stabilised (Fade Resistant)
• Seat height 440mm
• Overall dimensions: 900h x 620d x 570w
• Stackable to 4 high
• Unit weight: 5.2kg
• CATAS tested
• 3 year warranty
• SWL: 150kg
• High quality Batyline Duo fabric by Serge Ferrari
• Multi-filament, high-tenacity polyester yarn
• Solution-dyed protective sheath
• Biaxiale tensioning for extreme resistance
• Extreme tear resistance
• Comfortable
• UV protected
• Weather protected
• Quick drying
• Hygienic – mould resistant treatment
• stain resistant
• Fabric can be replaced
• 3 year warranty
• Suitable for indoor & outdoor commercial application
• Australian Registered Design 202110453 & 202110454
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.