adultfu

Description

Lisa armchair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W540 x D530 x H820 Seat Height 450
• Unit Weight: 3.8kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

Lisa armchair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W540 x D530 x H820 Seat Height 450
• Unit Weight: 3.8kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

Marina armchair features refinement and a design carefully prepared down to the smallest detail. The horizontal backrest and enhanges this splendid armchair. Practical and functional it has non-skid rubber caps, tubular legs and is stackable.

Features

• 1 year structural warranty
• Stackable
• Suitable for indoor and outdoor light commercial use
• Dimensions: 580W x 500D x 900H x 450 Seat Height
• Unit Weight: 4kg
• SWL: 135kg
• Supplied assembled
• Weather resistant
• Stocked In: White
• non slip rubber feet
• Matching Products: Ocean Side Table, Aqua & Havanna Sun Lounger
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Artemis Armchair by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Artemis Armchair is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Ares Chair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 565W x 580D x 830H x 450 Seat Height
• Arm Height: 675H
• Unit Weight: 5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Chocolate, Taupe
• Replaceable feet
• CATAS Tested
• Matching Products: Ares Chair, Ares Barstool
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Daytona Chair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Daytona Chair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Panama Armchair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 550W x 610D x 810H x 450 Seat Height
• Unit Weight: 3.5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Panama Armchair, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Daytona Chair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Daytona Chair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Panama Armchair

Features

• Stackable 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 550W x 610D x 810H x 450 Seat Height
• Unit Weight: 3.5kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Panama Armchair, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Verona Chair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Verona Chair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is?pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Capri Armchair & Jamaica Barstool

Features

• Stackable:?4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 470W x 600D x 840H x 455 Seat Height
• Unit Weight: 3.6kg, SWL: 150kg, Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Capri Armchair, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Florida Chair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Florida Chair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Ibiza Armchair & Jamaica Barstool

Features

• Stackable: 4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 450W x 550D x 880H x 460 Seat Height
• Unit Weight: 4kg, SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Ibiza Armchair, Jamaica Barstool, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Verona Chair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Verona Chair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is?pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Capri Armchair & Jamaica Barstool

Features

• Stackable:?4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 470W x 600D x 840H x 455 Seat Height
• Unit Weight: 3.6kg, SWL: 150kg, Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Capri Armchair, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Monna chair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W450 x D530 x H820 Seat Height 450
• Unit Weight: 3.4kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked in: Black, White, Anthracite & Taupe
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Ibiza Armchair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Ibiza Armchair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Florida Chair & Jamaica Barstool

Features

• Stackable:?4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 570W x 550D x 880H x 460 Seat Height
• Arm Height: 650H
• Unit Weight: 5.5kg, SWL: 150kg, Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Florida Chair, Jamaica Barstool, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Air Chair? by Siesta is no ordinary plastic chair. It’s extraordinary strength is due to the entire chair being one-piece injection moulded polypropylene, the legs reinforced with glass fibre for even more stability. The plastic is packed with UV stabiliser, so this chair will not fade or go brittle even in the sunniest weather conditions. Siesta’s Air Chair?is built to last in busy commercial venues, indoor or outdoor.

Matching chair to the Air XL Armchair?& Air Barstool?/em>

Air Chair?Comparison (Siesta vs Copy/Replica):

• Click here to watch a comparison video which will help you identify the differences
• The copy is not UV stabilised or resistant and will fade in direct sunlight – Click here to see a test
• The copy has no production stamp or trace to its manufacturer which is often a requirement for warranty and guarantee purposes
• The copy is not CATAS tested
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Features

• Stackable up to 4 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 500W x 600D x 820H x 450 Seat Height
• Unit Weight: 3.7kg
• SWL: 150kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Black, White, Red, Orange, Green, Taupe, Mango
• Replaceable feet
• CATAS Tested
• Matching Products: Air XL Armchair? Air Barstool?/li>
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Durafurn Florence Chair Timber Seat is manufactured using a solid European beech wood frame. It is a chair designed to withstand commercial use.

Features

• Suitable for indoor commercial use only
• Seat: Stain finish ply wood
• Frame: Quality stain finish solid European beech
• Dimensions: 440W x 440D x 850H x 460 Seat Height (Approximately)
• Unit Weight: 8kg (Approximately)
• SWL: 120kg
• Supplied unassembled – easy to assemble.
  (Chair can be supplied assembled at extra cost)
• Stocked In: Chocolate, Natural
• Matching Products: Florence Barstool – Timber Seat

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Durafurn Florence Chair Timber Seat is manufactured using a solid European beech wood frame. It is a chair designed to withstand commercial use.

Features

• Suitable for indoor commercial use only
• Seat: Stain finish ply wood
• Frame: Quality stain finish solid European beech
• Dimensions: 440W x 440D x 850H x 460 Seat Height (Approximately)
• Unit Weight: 8kg (Approximately)
• SWL: 120kg
• Supplied unassembled – easy to assemble.
  (Chair can be supplied assembled at extra cost)
• Stocked In: Chocolate, Natural
• Matching Products: Florence Barstool – Timber Seat

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Durafurn Florence Chair Timber Seat is manufactured using a solid European beech wood frame. It is a chair designed to withstand commercial use.

Features

• Suitable for indoor commercial use only
• Seat: Stain finish ply wood
• Frame: Quality stain finish solid European beech
• Dimensions: 440W x 440D x 850H x 460 Seat Height (Approximately)
• Unit Weight: 8kg (Approximately)
• SWL: 120kg
• Supplied unassembled – easy to assemble.
  (Chair can be supplied assembled at extra cost)
• Stocked In: Chocolate, Natural
• Matching Products: Florence Barstool – Timber Seat

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Snow chair is produced with a single injection of polypropylene reinforced with glass fibre obtained by means of the latest generation of air moulding technology with neutral tones. For indoor and outdoor use.? Available in Black, Anthracite, Taupe, Red, Mango and White.

Features

• Stackable:?4 to 6 high
• Suitable for indoor or outdoor use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: W520 x D560 x H830 Seat Height 470
• Unit Weight: 4.4kg
• SWL: 150Kg
• Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Heavy Duty AFRDI Approved – Black
• Stocked in: Black, Red, Anthracite, Taupe, Mango, White
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.

Description

The Ibiza Armchair is an injection moulded resin chair, the non-metalic frame will never unravel, rust or decay, with rattan look seat and back. Reinforced with glass fibre to strengthen the legs and boost the weight capacity. The Ibiza Armchair is stackable, designed for outdoor use, UV stable and weather proof, it will not fade or go brittle in Australia’s harsh outdoor conditions. Strong yet lightweight, this chair will add class to your venue. It’s sleek profile is pleasant to the eye so this chair is as charming as it is functional. Very easy to clean, just hose it down.

Matching chair to the Florida Chair & Jamaica Barstool

Features

• Stackable:?4 to 6 high
• Suitable for indoor and outdoor commercial use
• Made of UV stabilised polypropylene reinforced with glass fibre
• Dimensions: 570W x 550D x 880H x 460 Seat Height
• Arm Height: 650H
• Unit Weight: 5.5kg, SWL: 150kg, Supplied assembled
• Weather resistant, UV Stabilised, Glass fibre reinforced
• Stocked In: Anthracite, Chocolate
• Special Order Colours: White
• Replaceable feet
• CATAS Tested
• Matching Products: Florida Chair, Jamaica Barstool, All Resin Rattan Range Products
• Made in Europe
• Produced in accordance with ISO 14001:2015 Environmental Management System Certification

Please Note: Product Sizes, Weights & Colours may vary and are subject to change.