adultfu

Car cannot start? Pump not working? Engine conked out? And you realise that they all have a common problem. Flat battery. Now you can prepare for such unforeseen circumstances with our high-performance CT-15000, a powerful 15A Battery Charger that is compatible with all 12V and 24V lead-acid batteries (WET/MF/CA/EFB/GEL/AGM), 12V lithium-ion batteries and 12V AGM+ batteries. Fully automatic and easy to connect and use, the charger is your godsend in bringing life to dead batteries. The internal intelligent microprocessor makes charging faster, easier and safer. It provides continuous charge to batteries with an automatic floating charge mode and there is an inbuilt 6-way protection for sparks, reverse polarity, short circuits, overcurrent, overcharging and overheating to protect both use and battery. This means safe charging with total peace of mind. The charger comes with ten charging modes to suit your requirements. On SUPPLY mode, the charger becomes a secure 12V power source and can even be connected to vehicles to retain the on-board computer settings during battery repair or replacement. Portable and lightweight, the charger is equally useful to you on the road as it is in your workshop, garage or shed. If setting up in your workshop, you can easily mount the charger to your desired location using the mounting holes and included self-drilling screws. Never let your power down again as you power up with our battery charger.

Features:
Independent selection mode for 12V/24V battery
Built-in intelligent microprocessor
6-way protection: spark proof, reverse polarity, short circuit, overcurrent, overcharge, overheat
10 charging modes: Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V COLD/AGM, 12V AGM+, 12V LITHIUM-ION, REPAIR, 13.6V SUPPLY, 12V JUMP CHARGE
REPAIR mode: repairing old, idle, stratified or sulphated batteries (LEAD-ACID batteries only)
SUPPLY mode: can be used to retain a vehicle’s on-board computer settings during battery repair or replacement
8 fully automatic charging steps
Detailed error lights
Battery level indicator
Clamps and ring connectors
Four external holes for mounting (screws included)
Auto-memory: returns to last selected mode when restarted (except Standby Mode)
Automatic switching to maintenance status once fully charged without overcharging or damaging battery
Temperature controlled
Lightweight and highly portable
Tough and robust
SAA & CE approved

Specifications:
Model: CT-15000
AC input: 220V-240V, 50Hz-60Hz, 2.5A, 350W max
DC output: 12V, 15A; 24V, 7.5A; 12V, 20A(300 seconds)
Ambient temperature: 0℃-40℃
Charger type: 8 steps, fully automatic charging cycle
Battery compatibility: All types of 12V and 24V lead-acid batteries, 12V AGM+ batteries and 12V lithium-ion batteries
Battery capacity: 50Ah-400Ah (12V), 50Ah-200Ah (24V), Maintains All Battery Sizes
Cold/AGM mode: YES
Supply mode: YES, 13.6V/10A
Housing protection: IP33

Package Contents:
1 x 15A Battery Charger
1 x User Manual

Car cannot start? Pump not working? Engine conked out? And you realise that they all have a common problem. Flat battery. Now you can prepare for such unforeseen circumstances with our high-performance CT-7000, a powerful 7A Battery Charger that is compatible with all 12V and 24V lead-acid batteries (WET/MF/CA/EFB/GEL/AGM), 12V lithium-ion batteries and 12V AGM+ batteries. Fully automatic and easy to connect and use, the charger is your godsend in bringing life to dead batteries. The internal intelligent microprocessor makes charging faster, easier and safer. It provides continuous charge to batteries with an automatic floating charge mode and there is an inbuilt 6-way protection for sparks, reverse polarity, short circuits, overcurrent, overcharging and overheating to protect both use and battery. This means safe charging with total peace of mind. The charger comes with nine charging modes to suit your requirements. On SUPPLY mode, the charger becomes a secure 12V power source and can even be connected to vehicles to retain the on-board computer settings during battery repair or replacement. Portable and lightweight, the charger is equally useful to you on the road as it is in your workshop, garage or shed. If setting up in your workshop, you can easily mount the charger to your desired location using the mounting holes and included self-drilling screws. Never let your power down again as you power up with our battery charger.

Features:
Independent selection mode for 12V/24V battery
Built-in intelligent microprocessor
6-way protection: spark proof, reverse polarity, short circuit, overcurrent, overcharge, overheat
9 charging modes: Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V COLD/AGM, 12V AGM+, 12V LITHIUM-ION, REPAIR, 13.6V SUPPLY
REPAIR mode: repairing old, idle, stratified or sulphated batteries (LEAD-ACID batteries only)
SUPPLY mode: can be used to retain a vehicle’s on-board computer settings during battery repair or replacement
8 fully automatic charging steps
Detailed error lights
Battery level indicator
Clamps and ring connectors
Four external holes for mounting (screws included)
Auto-memory: returns to last selected mode when restarted (except Standby Mode)
Automatic switching to maintenance status once fully charged without overcharging or damaging battery
Temperature controlled
Lightweight and highly portable
Tough and robust
SAA & CE approved

Specifications:
Model: CT-7000
AC input: 220V-240V, 50Hz-60Hz, 1A,120W max
DC output: 12V, 7A; 24V, 3.5A
Ambient temperature: 0℃-40℃
Charger type: 8 steps, fully automatic charging cycle
Battery compatibility: All types of 12V and 24V lead-acid batteries, 12V AGM+ batteries and 12V lithium-ion batteries
Battery capacity: 14Ah-230Ah (12V), 14Ah-115Ah (24V), Maintains All Battery Sizes
Cold/AGM mode: YES
Supply mode: YES, 13.6V/5A
Housing protection: IP54

Package Contents:
1 x 7A Battery Charger
1 x User Manual

Have 12V battery will travel. With the Giantz Battery Box, there is no need to limit yourself to one location or one purpose for your deep cycle battery. The box can easily fit any deep cycle battery that measures L 35cm x W 20cm x H 22.5cm and turn it into a great power station. You can power up a host of devices including camping lights and portable fridges with its cigarette lighter socket as well as mobile phones and tablets with the two USB ports. The box itself can be charged using solar panels or any power source with its quick-connect Anderson plugs. Better still, the box comes pre-wired, so all you need to do is to connect to the deep cycle battery terminals and it is good to go. The box is strong and sturdy with a built-in voltage indicator and circuit breaker for safe and hassle-free use.
Note: Please note that deep cycle battery is not included in this purchase. Please check in-store listings for the deep cycle battery if you need it.

Features
Protective and portable
User-friendly
Digital voltage indicator
10A Re-settable circuit breaker
Two USB ports
Cigarette lighter socket
Anderson plugs
Positive and negative terminals
Sturdy housing
Heavy duty carry handle
Tie down strap
Compatible use with Giantz and other batteries

Specifications:
Overall dimensions: 45cm x 26cm x 31cm
Inner dimensions: 35cm x 20cm x 22.5cm
Assembly Required: No
Number of Packages: 1

Package Content
Battery box x1

This product comes with 1 year warranty

Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260

Have 12V battery will travel. With the Giantz Battery Box, there is no need to limit yourself to one location or one purpose for your deep cycle battery. The box can easily fit any deep cycle battery that measures 35cm x 18cm x 23cm and turn it into a great power station. You can power up a host of devices including camping lights and portable fridges with its cigarette lighter socket as well as mobile phones and tablets with the two USB ports. The box itself can be charged using solar panels or any power source with its quick-connect Anderson plugs. Better still, the box comes pre-wired, so all you need to do is to connect to the deep cycle battery terminals and it is good to go. The box is strong and sturdy with a built-in voltage indicator and circuit breaker for safe and hassle-free use.

Note: Please refer to the dimensions of the battery box and check to see if it will fit your deep cycle battery before making your purchase.

Note: Please note that deep cycle battery is not included in this purchase. Please check in-store listings for the deep cycle battery if you need it.

Features
Protective and portable
User-friendly
Digital voltage indicator
10A Re-settable circuit breaker
Two USB ports
Cigarette lighter socket
Anderson plugs
Positive and negative terminals
Sturdy housing
Heavy duty carry handle
Tie down strap
Compatible use with Giantz and other batteries

Specifications:
Overall dimensions: 43cm x 28cm x 25cm
Inner dimensions: 35cm x 18cm x 23cm

Package Content
1 x Battery box

Imagine the look on your little one's face when he/she receives this ride on Bugatti car as a gift! This ride on car delivers a plethora of fun and a unique driving experience. Each ride provides a new set of physical challenges and encourages your kids to grow and explore.

Our Bugatti ride on car is sure to impress your little driver with its looks, performance, and charisma. It boasts a uniquely beautiful and dynamic exterior design, a brilliant finish, and a solid build. Available in black and white, and black and orange models, this ride on Bugatti car has powerful twin motors for exhilarating performance and thrilling rides, heavy-duty suspension for smooth ride, premium anti-slip tyres, and a spacious seat with an adjustable safety belt for safety and comfort. Plus, it has stunning headlights for a brilliant presence, and other functions like MP3 connectivity, music, forward/reverse, key start, and allow/high speed button for a real-like driving experience. Furthermore, the gradual acceleration and deceleration prevents sudden jerks or stops. The remote-control function and EN71 Standard Safety of Toys certification ensure the safety of the child.

Everything about this ride on car is attractive and amazing. So, present this ride on car to your little ones and see them happy every day. Unlimited fun guaranteed with every ride.

Note:

1.Please charge the batter on receiving it even if the battery will not be used in the near future.

2.It is advised to charge the battery EVERY MONTH if not in use for long periods. This is to prevent over-discharging of the battery which will cause irreparable damage to it.

Features
Bugatti inspired twin motor kids ride on car
Premium quality with realistic design
Anti-slip and long life treaded wheels for safe driving
Quality EVA tyres; can move around on almost all surfaces
Battery operated with a speed of 3 to 8km/h
Large comfortable seat with seat belt
Eye catching flashing lights with music
Key start engine provides realistic driving experience
Two control modes; manual and remote
MP3 connection for your own music
SAA approved battery charger
Suitable for children above 3
Complied with EN71 standard Safety of Toys

Specifications
Motor: 50W (2 x 25W)
Control mode: manual & remote
Remote control range: 20m±5m
Speed range: 3-8km/h
Battery: 2 x 6V 4.5AH lead acid
Battery input: D.C 12V 1000mA
Charge time: 6-8hrs
Operating time: 1.5 hours to 2 hours per full charge
Flashing light: Yes
Load capacity: 30kg
Seat belt: Adjustable
User: 3+ years old
Colour: Black & White
Dimension: 95 x 53 x 46cm
Weight: 12kg
Battery type of remote: AAA

Package Content
1 x Kids Ride On Car
1 x User Manual

You're on solo adventures time to time? You will find getting a hand winch extremely helpful and is significantly cheaper than fitting a dedicated rear mounted winch. Hand winching any vehicle is a tough work; but with the advanced technology, it makes a significant help in winching any car!

Made with superior Dyneema synthetic rope and 3 speed gearing to suit different mudding case you have, any tough situation wouldn't be a problem anymore. You can put your trust on this fantastic made hand winch. Durable for all weather conditions w/ rust resistant Dacromet coating, you can imagine using it under a rainy day or a super hot sunny day. Just one that you shouldn't missed having.

Able to hold up to 2000kg, enough for most light 4WDs in any tough situations. 10 meters of cable, allowing enough recovery when you are at a respectable distance from the nearest tree line. Just all the goodies that you need in this one! Easily get it online now and it'll get delivered to your doorstep.

Features
Heavy duty 2000kg hand winch
7mm diameter x 10m class leading Dyneema synthetic rope
3 speed gearing
Rust resistant Dacromet coating
Stable base w/ universal mounting holes
Removable handle for switching speed anytime
Clevis hook w/ safety latch
Durable resistance to all weather conditions

Specifications
Rope diameter: 7mm
Rope length: 10m
3 speed: 17:1, 5:1, 1:1
Coating: Dacromet
Material: Carbon steel

Package Content
1 x 2000kg Hand Winch

Made from heavy gauge flat stock steel, the Giantz hand puller winch provides 4000kg of pulling power. Featuring sturdy aircraft grade steel cable and double gear ratcheting gearbox for superior handling and maximum performance.

Providing you the convenience you need whenever you need a hand on loading, removing or tighten any heavy things that you can think of!

Features
Portable hand winch
Great in moving heavy equipments
To tighten fencing
Landscaping such as removing tree stumps or debris
Assist in loading boat on to a trailer
Made of steel constructions - heavy gauge flat stock steel
Standard series - perfect for home mechanic
Drop forged safety catch hooks for heavy loads
360 degree hanging catching hook
Non slip cushion grip handle
Heavy duty aircraft cable
Heavy duty ratchet and pawl
Two-wheel ratcheting gearbox

Specifications
Body material: Flat stock steel
Cable material: Aircraft grade steel
Cable size: Φ5.5mm x 3.3m
Effective distance: 1.2m
Surface treatment: Zincification
Brake type: Ratchet
Capacity: 4 Tons
Weight: 5.50kg

Package Content
1 x Giantz Hand Puller Winch

When the going gets tough, the tough gets a GIANTZ 4500lbs Electric Winch.

Vehicle stuck in a hog? Or a fallen tree across your 4x4 adventure drive? Then you’ll be glad you have our Electric Winch to pull you through unpleasant circumstances.

Built super tough, the Electric Winch features a rated line pull of 4500lbs powered by a 12V 2hp DC motor and enclosed in a waterproof and corrosion-resistant heavy duty housing. It also comes with a 5.5mm thick high tensile steel cable that stretches up to 15m long.

The three-stage planetary gear system makes for fast line speed and sure hold whilst for maximum safety, an automatic load-holding brake ensures that the winch is protected from excessive winching.

Operating the winch is easy with wired or wireless remote control. Other quality accessories include forged steel clevis hooks, mounting plate and a bonus pulley hook for double line winching.

So before you take off for those challenging off-road escapades, make sure you have the GIANTZ Electric Winch mounted. Every adventure and journey will be all the more prepared and enjoyable.

Features
4500lb rated line pull
15m high tensile steel cable
5.5mm thick steel cable
2hp 12V DC motor
Three-stage planetary gear system
Four-way roller fairlead
Automatic load-holding brake
Waterproof and corrosion-resistant
Wired and wireless remote control
Bonus pulley hook
Free spooling clutch

Specifications
Voltage: DC 12V
Single line pulling capacity: 4500lbs (2041kgs)
Winch motor: 2HP (1.5KW) permanent magnet
Gear train: 3 stage planetary
Gear ratio: 136:1
Clutch: Sliding ring gear
Braking action: Automatic in the drum
Fairlead: Aluminum
Remote control cable: 305cm
Steel Cable Length: 15M
Steel Cable Diameter: 5.5mm
Battery wire: 1.6m
Motor wire: 1.1m
Mounting hole: 124 × 76mm
Drum length: 74mm
Dimensions: 34.5x11x11cm
Weight: 10.35kg

Package Content
1 x GIANTZ 4500lbs Electric Winch
1 x Steel Wire Rope
1 x Fairlead Roller
1 x Clevis Hook
1 x Pulley
1 x Wireless Remote Control
1 x Hand Remote Control
2 x Battery Wire
2 x Motor Wire
1 Set x Accessory Pack
1 x User Manual

Airing down is a key part of any off road trip. Quite often it is the tyre pressure which determines if you can make it or get stuck. By lowering tyre pressure it allows you to gain extra traction on soft surface and avoid tyre punctures.

Featuring durable and corrosion resistant rubber housing with an operating range of up to 60PSI, the GIANTZ 2-IN-1 Tyre Gauge & Deflator allows you to quickly deflate large tyres to very low pressures while monitoring the pressure on the gauge. The gauge shows accurate tyre pressure in 5 measurement units; Psi/Kpa/Kg/cm2/Bar when the release valve is pressed. With precise control, it will deflate your tyre in 30 seconds! The GIANTZ 2-IN-1 Tyre Gauge & Deflator is very simple and easy to use with no additional tool required.

Features
4-Way tyre valve tool
Stainless steel shaft
Corrosion resistant
Anti shock gauge
Premium quality brass deflator
Operating range of 60PSI - 0PSI
Rapid deflating speed
Convenient hands-free deflation
Large white display panel
Easy to read dual pressure measurements
No additional tool required
Comes w/ a storage case
Suitable for all tyres with standard valve

Specifications
Operating range: 60PSI - 0PSI
Deflating speed: 1 PSI/second
Increment: 1 PSI
Measurement unit: PSI/kpa/kg/cm2/Bar
House length: 29.5cm
Colour: Black

Package Content
1 x 2-IN-1 Tyre Gauge & Deflator
1 x 4-Way Tyre Valve Tool
4 x Valve Cap
1 x Storage Case

LED MANUFACTURER OSLON® Black, LCW  3w

LED bike light set / Kit USB Rechargeable front and back with Bar mount Clip and rear light Band 2018 for night riding, can also fit for helmet
White LED Headlight & Red LED Taillight light have 5 Modes according to your need.
Super silicone mounting strap. The strap is elastic enough to fit all kinds of bikes and can be mounted on any part of the bike. Silicone strap length:7.3cm
USB rechargeable light. One built-in 650 mAh rechargeable lithium battery for each light. No battery replacement.
Get riding safely. Guide the way with the headlight and taillight.
This multipurpose Bike / Bicycle light provides superior protection for road or mountain bikers, kids and even runners for night riding. Universally mounts to any bike in seconds & offers 5 levels of illumination / flashing.

Level 1 – Red

Level 2 – White

Level 3 – Flashing Red

Level 4 – Slow Flashing Red

Level 5 Strobe White and Red

Discharge Time of Full charge
Head /Tail Light: 3.5hr (full brightness), 10.5hrs (slow flashing), 10hrs (fast flashing RED+WHITE)
Battery: 650mAh rechargeable lithium battery
Dimension: 50 x 45 x 40 (mm)
Waterproof: IPX4

How to Charge
1, Attach the micro USB cable to the Bike Light's micro USB input port
2, Insert the other end of the cable into either an AC adapter (not included) connected to a wall socket or an active computer USB port
3. The LED indicator will turn to be green when the Bike Light is fully charged
bar.

Package Contents
2x USB Rechargeable LED Bike lamp
2x USB cables

LED MANUFACTURER OSLON® Black, LCW 3w

Color Temperature : 5700K

LED COUNT 42

VOLTAGE 9V - 32V

LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN

LUMENS 13,230 LUMENS Each

PEAK INTENSITY (CANDELA) 45,294 cd

HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink

AMPERES 7.916@ 12v , 3.958A@24v

LIFESPAN 50,000 Hours

Spot Beam : 30 Degree

Flood Beam : 60 Degree

INGRESS PROTECTION IP68

OPERATING TEMP -20°C to 50°C

Distance 1 Lux @ 550m

WEIGHT 3kg (Each)

Package Content

1x 20" Combo Beam Led Light Bar - 5D LENS

2x Lower Adjustable Mounting Brackets

NO WIRING LOOM ATTACHED, PLEASE CONTACT US FOR A WIRING LOOM HARNESS OFFER*

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.

AVOID THOSE CHEAP RIP OFF FROM THE MARKET

ADVANCED DESIGN: USB rechargeable light, built in 650mAh rechargeable lithium battery for each light. Water resistant rated to IPX4 - Protected against splashing water from any angle.

FOUR LIGHT MODE OPTIONS: The Headlight and Taillight feature an one-touch switch with four different lighting modes depending on your preference. Include full brightness, half brightness, fast flashing and slow flashing.

EASY INSTALLATION: The silicone mount straps are designed with two openings that tightly fit around many size seat posts, handlebars, seat risers, backpacks, helmets and stretch to keep lights secure and firm. They can be easily loosen and fasten, and no tools are required.

MUTIFUNCTION: This bike light set is versatile enough for cycling, hiking, camping, or any outdoor activity and can be used as emergency flashlight. This is great for cycling at night or in places where visibility and safety are concern. So, just start your next adventure with us.

Specifications:
Color: Red/White
Material: aluminum alloy + engineering plastic
4 modes: strong, weak, slow flash, strobe
LED: 3 x bright LEDs
How to charge: through Micro USB cable
Size:50*45*40mm

Package included:
1 x Bike White Front Light
1 x Bike RED Rear Light
2 x USB charging cable

Features

4x Premium Aluminium LED camping light bar

30 x 5050 LED each Strip (The best you can get!)

High quality circuit board & component

Waterproof light strip and socket, quick connector

Car charger, extension and other accessories included

Package Content:

4 x 500 mm - 30 SMD5050s
Silver/grey aluminium magnetic strip
1 x 3m quick connect lead with cigarette lighter plug
1 x battery terminal clamp to cigarette adaptor
1x dimmer Switch
3 x 1.5m extension lead
8 x velcro straps
1 x carry bag

LED MANUFACTURER Philips Lumileds 1w (P/N : L130-5770003000W21)

Color Temperature : 5700K

LED COUNT 216

VOLTAGE 9V - 32V

LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN

LUMENS 22,420 LUMENS Each

PEAK INTENSITY (CANDELA) 77,472 cd

HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink

AMPERES 9.1A@ 12v , 4.55A@24v

LIFESPAN 50,000 Hours

Spot Beam : 30 Degree

Flood Beam : 170 Degree

INGRESS PROTECTION IP68

OPERATING TEMP -20¡ãC to 50¡ãC

WEIGHT 3.5kg (Each)

WHAT'S IN THE BOX

1x 28" Combo Quad Row Led Light Bar

2x Lower Adjustable Mounting Brackets

NO WIRING LOOM ATTACHED, PLEASE CONTACT US FOR A WIRING LOOM HARNESS OFFER*

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.

AVOID THOSE CHEAP RIP OFF FROM THE MARKET

Shipping :

Please note that deliver to PO BOX address is available.

Please also be noted that we are directly seller located in Port Melbourne (NOT DROP SHIPPING OR SHIP FROM CHINA)

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.

LED MANUFACTURER Philips Lumileds 1w (P/N : L130-5770003000W21)

Color Temperature : 5700K

LED COUNT 180

VOLTAGE 9V - 32V

LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN

LUMENS 15,350 LUMENS Each

PEAK INTENSITY (CANDELA) 52784 cd

HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink

AMPERES 7.4A@ 12v , 3.7A@24v

LIFESPAN 50,000 Hours

Spot Beam : 30 Degree

Flood Beam : 170 Degree

INGRESS PROTECTION IP68

OPERATING TEMP -20¡ãC to 50¡ãC

WEIGHT 3.1kg (Each)

WHAT'S IN THE BOX

1x 23" Combo Quad Row Led Light Bar

2x Lower Adjustable Mounting Brackets

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.

AVOID THOSE CHEAP RIP OFF FROM THE MARKET

Shipping :

Please note that deliver to PO BOX address is available.

Please also be noted that we are directly seller located in Port Melbourne (NOT DROP SHIPPING OR SHIP FROM CHINA)

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.

LED MANUFACTURER Philips Lumileds 1w (P/N : L130-5770003000W21)

Color Temperature : 5700K

LED COUNT 144

VOLTAGE 9V - 32V

LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN

LUMENS 11,970 LUMENS Each

PEAK INTENSITY (CANDELA) 398,160 cd

HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink

AMPERES 6.5A@ 12v , 3.3A@24v

LIFESPAN 50,000 Hours

Flood Beam : 170 Degree

INGRESS PROTECTION IP68

OPERATING TEMP -20¡ãC to 50¡ãC

WEIGHT 2.8kg (Each)

WHAT'S IN THE BOX

1x 20" Combo Quad Row Led Light Bar

2x Lower Adjustable Mounting Brackets

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.

AVOID THOSE CHEAP RIP OFF FROM THE MARKET

Shipping :

Please note that deliver to PO BOX address is available.

Please also be noted that we are directly seller located in Port Melbourne (NOT DROP SHIPPING OR SHIP FROM CHINA)

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.

LED MANUFACTURER CREE 3W GEN2

Color Temperature : 6500K

LED COUNT 16

VOLTAGE 12V & 24V

LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN

LUMENS 4,850 LUMENS Each

PEAK INTENSITY (CANDELA) 6431.18 cd

HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink

AMPERES 4.07A@ 12v , 2.03A@24v (Each) [ +-5%]

LIFESPAN 50,000

FLOOD BEAM 50.5¡ã

INGRESS PROTECTION IP68

OPERATING TEMP -40¡ãC to 60¡ãC

WEIGHT 0.65kg (Each)

WHAT'S IN THE BOX

2x Genuine 48W LED work Light

2x Stainless Steel Grade 304 Mounting Brackets

(not the best one compare to 316, so extra caution on the brackets will be needed for MARINE USAGE)

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.

AVOID THOSE CHEAP RIP OFF FROM THE MARKET

Shipping :

Please note that deliver to PO BOX address is available.

Please also be noted that we are directly seller located in Port Melbourne (NOT DROP SHIPPING OR SHIP FROM CHINA)

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.

Features:
LED MANUFACTURER CREE 3W GEN1
Color Temperature : 5700K
LED COUNT 6
VOLTAGE 12V & 24V
LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN
LUMENS 1,650 LUMENS Each
PEAK INTENSITY (CANDELA) 8506 cd
HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink
LIFESPAN 50,000
FLOOD BEAM 60
INGRESS PROTECTION IP68
OPERATING TEMP -40°C to 60°C
WEIGHT 0.25kg (Each)

Package Content:
2 x 6inch 18W LED Work Light Bar Driving Lamp Flood Truck Offroad MINING UTE 4WD

We only provide GENUINE LED Light Bar with GENUINE OUTPUT AND BEST IMPORT QUALITY.
AVOID THOSE CHEAP RIP OFF FROM THE MARKET

Shipping :
Please note that deliver to PO BOX address is available.
Please make sure you have provided a correct physical address during checkout on products of excessive size.
To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.
Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.
Your item will be sent via Australia Post or Local Courier depending on its availability.

Specification :

Led Power: 20W (Genuine 1W Philips Lumileds LED chips)
Beam Type : Ultra Flood Beam
Amp Draw : 1.2A @12v , 0.6A@24v
Voltage:10~30V DC
Color Tempreatuer:5700K
Luminous: 3800LM
Lens Material: PMMA
Housing:Die-cast Aluminum
Mounting Brackets: Aluminum
Waterproof Rate: IP68
Lifespan:30000hours
Operation Temperature:-40¡ãC ~ 80¡ãC

Package Content:
2x 20W Led Light Bar

Shipping :
Please note that deliver to PO BOX address is available.

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.